Sometimes you gotta start
with a fresh sheet of paper
Professional Land Clearing in Clyde
Brush and Land Clearing Work
Land Clearing
Heavy brush and mesquite eat up good acreage fast. We’ll clear underbrush, cedar, and trees for pasture, fence lines, and build sites.
Brush & Mesquite Control
Mesquite and cedar take over Callahan County acreage in a hurry. We’ll grub it out at the root, not just cut it off at the ground, so the brush stays gone and your pasture actually gets to recover.
Fence-Line Clearing
Overgrown fence lines snag your equipment and hide broken wire. We’ll clear the brush and saplings crowding along the fence so you can walk it, fix it, and keep livestock right where they belong.
Large Tree Removal
Clearing land often means a few big trees have to go along with all the brush. We’ll drop and section the large heavy wood down safely, then move on to the scrub, all in one coordinated visit.
Tree Removal
Some trees on a clearing job are worth keeping and some just plain aren’t. We take out the ones crowding your build site or fence line and leave the shade trees you actually want left standing.
Stump Removal
On a build pad or a new fence line, ground-down isn’t always going to be enough. We’ll pull whole stumps and roots up out of the way so your footings, posts, and slabs all sit on clean ground.
Storm Damage Cleanup
A bad storm can flatten brush and trees across a whole tract of land. We’ll clear the downed tangle along with the standing scrub so your land is usable again instead of one big blown-down mess.
Did you know?
Here’s a date worth marking: don’t prune your oaks from February through June. That’s when the beetles that spread oak wilt are busiest, and a fresh cut is basically an open door you don’t want to leave them.
Land Clearing in Clyde Questions
We don’t mind answering questions
Clearing land or fence lines? These answers cover acreage, mesquite regrowth, disposal, and how we’ll prep your property.
Do you clear small lots in Clyde as well as big acreage?
Both, and the equipment changes to match. A quarter-acre lot in town that’s grown up in brush gets smaller machines and more hand work, while a big rural place gets the mulcher or a skid steer with a grubbing attachment. The idea is the same either way: cut it, get the roots out where it matters, and leave the ground usable. We take plenty of rural acreage jobs other crews turn down.
Can I clear part of my Clyde acreage now and the rest later?
Yes, and plenty of landowners do it that way. We’ll start where it pays off first, usually the house pad, the drive, or the pasture you want back in production. Splitting it up spreads the cost, though each trip means hauling equipment again, so bigger phases run more efficiently than several little ones. Density, terrain, and what we do with the material still drive the price.
Will you leave the good shade trees standing when you clear?
Yes, if you mark them we’ll work around them. Most acreage out here has a few live oaks or a pecan worth keeping, and losing one to a machine is a mistake you can’t undo. We walk the property with you first and flag what stays. We’ll also point out anything that looks like it’s dying, so you can decide before the equipment ever shows up.
Can a root plow get mesquite roots out of Callahan County ground?
Yes, a root plow is one of the tools we run on heavier mesquite ground. It pulls a blade below the surface and severs the taproot underneath, which is where regrowth starts. It works best on open ground where the machine can make a straight run, and it does turn the soil, so it’s the wrong tool anywhere you want the ground left alone. We don’t spray anything out here. It’s all machine work.
How do I keep mesquite from taking my cleared pasture back?
Watch it and knock it down while it’s small. There’s decades of seed already in that dirt, and one wet spring wakes it up. Seedlings pull or grub out easily, but wait five years and you’re hiring equipment again. A walk-through each spring, plus grazing that keeps the grass thick, does most of the work. Call us back for a cleanup pass when it starts creeping.
Do the stumps come out when you clear a lot?
That depends on what the ground is for. If you’re building, running equipment, or seeding pasture, stumps need to come out or get ground below grade so nothing catches a tire or a blade. If you’re opening up a view or knocking fuel back away from the house, cut low is often enough on cedar. Mesquite is the exception, since anything left at the ground line comes back. We’ll ask what the land is for before we put a number on it.
Will the mulch left behind smother my pasture grass?
Not if it’s spread, and mulching in place is only one of three routes. We can grind the brush into chips spread across the ground, windrow it into piles where you want them, or load it up and haul it off entirely. Spread chips don’t smother pasture, since grass comes up through a thin layer and the mulch holds moisture in the soil. Thick brush can leave a deep mat, so we rake that out on ground you plan to seed.
Can I keep the mesquite wood for firewood after clearing?
Sure, and a lot of folks do. Mesquite burns hot and it’s good smoking wood, so tell the crew before we start and we’ll cut the usable trunks into rounds and stack them where you want them. The rest, brush and small limbs, still goes to mulch or a pile. It doesn’t change the job much as long as we know going in.
How should I get my Clyde property ready for a clearing crew?
Mark what matters and open us a way in. Flag your water lines, septic field, buried electric, well head, and any survey pins, because none of that shows once the brush is down. Move livestock out of the work area and tell us which gates we can use. If there are trees you want kept, tie ribbon on them. We’ll walk all of it with you at the estimate.
Will the ground be ready to seed or build on when you’re done?
Close, though grading is its own step. Clearing takes the brush and the roots out and leaves the ground workable, and on most jobs that’s enough to drill seed or drag it smooth. A building pad still needs a dirt contractor to cut and compact it to spec after we pull off. We’ll leave a clean surface and say plainly what’s still left to do.
Quick Links
Services
Contact Info
Please Review Us
We sure could use your help letting Clyde know how good we are.
Copyright © 2026. All rights reserved.